CYCLEPOWER cog carrier for 'Rohloff's Speedhub'-internal gear hub & Gates cogs

Quality - made in Austria.

1 Customer Rating

  • universally usable for Rohloff's Speedhub gear hub
  • for the current cog system of Rohloff
  • no clacking of the cog anymore
  • easy to change
  • $45.83

All prices excl. VAT. Excludes delivery costs

In stock - Just available for a short time.

Delivery on Monday, 27 September: Order today until 13:30.

  • CYCLEPOWER Pinion Carrier Steel v1
  • CYCLEPOWER splined carrier
Add to Wish List

Item no.: 62658-4, Content: 1 piece

EAN: 9120068560306

  • universally usable for Rohloff's Speedhub gear hub
  • for the current cog system of Rohloff
  • no clacking of the cog anymore
  • easy to change
Standard: $45.83
Wide: $46.66

Product information & technical details

Item no.: 62658-4
brand: CYCLEPOWER
Content: 1 piece
Product weight: 49,4g
Material: Aluminium, stainless steel
brand: CYCLEPOWER

Description

  • Sprocket carrier for Rohloff's gear hub, suitable for both Speedhub types: the 135mm wide hub and the 170mm wide.
  • Thanks to the highly polished TC-seal contact surface, an optimal sealing function of the hub is guaranteed - better than the original! And more permanent.
  • Universally suitable for conventional chain drives via classic pinions. Especially suitable for Gates® toothed belt pinions with a bore diameter of 38.2mm
  • an aluminum counter ring secures the pinion on the pinion carrier without play - no clacking of the pinion while driving! The counter ring is equipped with a standard Shimano® Hollowtech 2 bottom bracket toothing, so that it can be easily opened and closed with a socket from various manufacturers (see illustration). Just turn it on and you're done. Without extra tools.
  • the splined carrier is mounted on the hub and remains there permanently. Only the lockring is dismantled to change the pinion.
  • The sprocket carrier is compatible with Gates® Carbondrive sprockets from 19 teeth upwards, which have a bore diameter of 38.2mm. Chain sprockets such as the cyclepower® plug-in sprocket (aluminum version or steel version ) can be ridden from 14 teeth upwards.
  • When using Gates® toothed belt pinions, it is possible to adjust the chain line by 1mm on the pinion carrier using a spacer ring by adding this spacer ring either inside or outside.
  • The versions of the pinion carrier differ as follows:
    • Standard : The chain line corresponds exactly as specified by Rohloff.
    • Wide : The chain line is offset outwards by 2mm compared to the standard version. This can be particularly helpful for fat bikes, but also for bikes with plus tires. It can be used universally for all types of bicycles
  • You will find an overview of achievable chain lines in correspondance of each splined carrier below.

Overview: effective chain line of the splined carrier on the Speedhub gear hub for 135mm installation width
default Wide
Chain sprocket 57 59
Gates® Carbon drive sprockets 55.7 / 56.7 57.7 / 58.7
All information in millimeters

Overview: effective chain line of the splined carrier on the Speedhub XL gear hub for 170mm installation width
default Wide
Chain sprocket 75 77
Gates® Carbon Drive sprockets 73.7 / 74.7 75.7 / 76.7
All information in millimeters

Further details

Please note that the sprockets or tools shown (toothed belt and/or chain) are not included. They are advertised for illustration purposes only.

Questions & Answers about CYCLEPOWER splined carrier

Pose a question about this product to customers who have already purchased the item. Please forward any other order-related questions to our Customer Service Team.

Customer Reviews

1 English review written for CYCLEPOWER splined carrier

1 customer review in other languages

5,0 out of 5 stars
5 stars
2 (100%)
4 stars
0 (0%)
3 stars
0 (0%)
2 stars
0 (0%)
1 Stars
0 (0%)

2 reviews
1 customer review in English
1 customer review in other languages